The Wonder TE Leg is made of high density polyethylene and can withstand 2,500 pounds of direct pressure. It inserts from the top side of the deck through a rounded square die cut hole. Rotating the leg 1/8 of a turn in either direction after insertion allows the locking tab to engage. A deck thickness of 5/16 inches is accommodated with this leg. The Wonder TE Leg can be used with a Bottom Threaded Retainer if a lower deck or runner is desired.
Technical Data
6425 Zinnia Lane North • Maple Grove, MN • Tel: (651)-462-4559 • Fax: (763)-390-2942 • Email: flaniworks@comcast.net
The Wonder TE Leg is made of high density polyethylene and can withstand 2,500 pounds of direct pressure. It inserts from the top side of the deck through a rounded square die cut hole. Rotating the leg 1/8 of a turn in either direction after insertion allows the locking tab to engage. A deck thickness of 5/16 inches is accommodated with this leg. The Wonder TE Leg can be used with a Bottom Threaded Retainer if a lower deck or runner is desired.
